资源类型

期刊论文 151

年份

2023 13

2022 19

2021 10

2020 10

2019 12

2018 8

2017 8

2016 5

2015 4

2014 6

2013 5

2012 3

2011 5

2010 2

2009 9

2008 5

2007 6

2005 1

2004 1

2003 3

展开 ︾

关键词

横梁 3

三峡工程 2

三点弯曲梁 2

增材制造 2

弯曲正应力 2

整体穿刺 2

残余应力 2

混凝土 2

电子束 2

组合梁 2

5G 1

ICF 1

LMS 1

Nelder-Mead单纯形法 1

TC4钛合金 1

X射线 1

Z箍缩 1

三峡升船机 1

三维有限元 1

展开 ︾

检索范围：

排序： 展示方式：

Effect of asphalt thin beams mixed with three nominal maximum aggregate sizes in the bending beam rheometer

Chun-Hsing HO,María Francisca Martínez GONZÁLEZ,Cristina Pilar Martín LINARES

《结构与土木工程前沿（英文）》 2017年 第11卷 第1期   页码 1-7 doi: 10.1007/s11709-016-0367-5

摘要： The objective of this research is to evaluate an impact of asphalt mixture beams with varying sizes of aggregate in the Bending Beam Rheometer (BBR) for testing/predicting thermal cracking properties of asphalt pavements. The BBR test has following benefits: the equipment is cheaper, it uses smaller specimens, faster conditioning, easier availability for quality control, easier to manage, etc. However some concerns have been raised: some consider that the size of the aggregate may affect the test’s results; the other concern is that such small beams cannot represent the whole properties of the asphalt pavement. To address these criticisms, imaging techniques, statistical analysis, and viscoelastic modeling are used. Asphalt thin beams prepared with three different nominal maximum aggregate size (NMAS) (12.5mm, 9.5 mm, and 4.75 mm) were tested at three different temperatures (-18°C, -24°C, and -30°C). Based on results from statistical analyses and viscoelasticity, the ratio of asphalt binders and voids and stiffness differences among the three NMAS specimens are not significant, meaning that the impact of asphalt thin beams prepared with the three NMAS on the prediction of thermal cracking is minimal and can be neglected.

关键词： bending beam rheometer     thin beams     thermal cracking    

HTML PDF 收藏

Erratum to: Bending and vibration of a discontinuous beam with a curvic coupling under different axial

《机械工程前沿（英文）》 2022年 第17卷 第2期 doi: 10.1007/s11465-022-0709-z

HTML PDF 收藏

软夹芯夹层梁最大弯曲正应力的计算

郝景新,刘文金,吴新凤

《中国工程科学》 2014年 第16卷 第4期   页码 92-95

摘要：

最大弯曲正应力是衡量夹层梁弯曲性能的重要参数之一，本文推导出了将软夹芯夹层梁等效成等 截面均质单层梁计算最大弯曲正应力的方法，并在此基础上进行三点弯曲试验的算例研究。结果表明：修正单层梁理论与层合梁理论计算的结果是一致的。当破坏载荷与夹层梁横截面的尺寸一定时，随着芯层与总厚度比的增加，修正单层梁理论计算的最大正应力值逐渐增加，而单层梁理论计算的结果为一恒定值。最大弯曲正应力修正公式的建立为夹层梁的工程应用提供理论基础。

关键词： 夹层梁     弯曲正应力     单层梁理论     弯曲特性    

HTML PDF 收藏

Bending and vibration of a discontinuous beam with a curvic coupling under different axial forces

Heng LIU, Jie HONG, Dayi ZHANG

《机械工程前沿（英文）》 2020年 第15卷 第3期   页码 417-429 doi: 10.1007/s11465-019-0584-4

摘要： The transverse stiffness and vibration characteristics of discontinuous beams can significantly differ from those of continuous beams given that an abrupt change in stiffness may occur at the interface of the former. In this study, the equations for the deflection curve and vibration frequencies of a simply supported discontinuous beam under axial loads are derived analytically on the basis of boundary, continuity, and deformation compatibility conditions by using equivalent spring models. The equation for the deflection curve is solved using undetermined coefficient methods. The normal function of the transverse vibration equation is obtained by separating variables. The differential equations for the beam that consider moments of inertia, shearing effects, and gyroscopic moments are investigated using the transfer matrix method. The deflection and vibration frequencies of the discontinuous beam are studied under different axial loads and connection spring stiffness. Results show that deflection decreases and vibration frequencies increase exponentially with increasing connection spring stiffness. Moreover, both variables remain steady when connection spring stiffness reaches a considerable value. Lastly, an experimental study is conducted to investigate the vibration characteristics of a discontinuous beam with a curvic coupling, and the results exhibit a good match with the proposed model.

关键词： discontinuous beam     bending stiffness     transverse vibration     axial loads     gyroscopic moments    

HTML PDF 收藏

砼非标准三点弯曲梁试件双K断裂参数

吴智敏,徐世烺,丁一宁,卢喜经,刘佳毅,丁生根

《中国工程科学》 2001年 第3卷 第4期   页码 76-81

摘要：

采用跨高比为2.5的非标准三点弯曲梁试件，利用在试验中测得的最大荷载Pmax及对应的裂缝口张开位移CMODc，根据渐近线性叠加假设，求得了砼裂缝亚临界扩展量∆ac。在此基础上，采用虚拟裂缝模型计算了不同初始缝长、不同试件髙度的砼非标准三点弯曲梁试件的起裂断裂韧度KiniIC、失稳断裂韧度KunIC及临界裂 缝尖端张开位移CTODc。计算结果表明，砼KunIC：与试件高度及初始缝高比无关；而KiniIC在初始缝髙比a0/h = 0.3〜0.5内，也是一稳定的常数且与试件高度无关。这说明砼双K断裂参数可以作为砼的材料常数。

关键词： 砼     三点弯曲梁     断裂参数    

HTML PDF 收藏

Performance of fixed beam without interacting bars

Aydin SHISHEGARAN, Behnam KARAMI, Timon RABCZUK, Arshia SHISHEGARAN, Mohammad Ali NAGHSH, Mohammreza MOHAMMAD KHANI

《结构与土木工程前沿（英文）》 2020年 第14卷 第5期   页码 1180-1195 doi: 10.1007/s11709-020-0661-0

摘要： Increasing the bending capacity of reinforced concrete (RC) elements is one of important topics in structure engineering. The goal of this study is to develop a transferred stress system (TSS) on longitudinal reinforcement bars for increasing the bending capacity of RC frames. The study is divided into two parts, i.e., experimental tests and nonlinear FE analysis. The experiments were carried out to determine the load-deflection curves and crack patterns of the ordinary and TSS fixed frame. The FE models were developed for simulating the fixed frames. The obtained load-deflection results and the observed cracks from the FE analysis and experimental tests are compared to evaluate the validation of the FE nonlinear models. Based on the validated FE models, the stress distribution on the ordinary and TSS bars were evaluated. We found the load carrying capacity and ductility of TSS fixed beam are 29.39% and 23.69% higher compared to those of the ordinary fixed beams. The crack expansion occurs on the ordinary fixed beam, although there are several crack openings at mid-span of the TSS fixed beam. The crack distribution was changed in the TSS fixed frame. The TSS fixed beam is proposed to employ in RC frame instead of ordinary RC beam for improving the performance of RC frame.

关键词： transferred stress system     bending capacity     crack opening     crack propagation     FE nonlinear model     stress distribution    

HTML PDF 收藏

黏聚裂纹阻抗的弯曲梁承载力

王利民,徐世,任传波

《中国工程科学》 2007年 第9卷 第2期   页码 30-35

摘要：

在混凝土类软化材料断裂研究中，裂纹端部损伤区被简化为具有黏聚应力分布的非线性裂纹，该黏 聚力对裂纹扩展有阻抗作用。裂纹体的应力强度因子是断裂力学标志载荷作用与几何构型因素的量化表达指标； 黏聚力形成的阻抗强度因子数值，与黏聚裂纹长度和材料极值拉伸应力存在数量关系。通过双K断裂判据，以 带切口的三点弯曲梁为断裂力学模型，分析了裂纹黏聚阻力对断裂过程的影响规律，计算该弯曲梁结构断裂试 样的最大承担载荷；其结果比较符合实验数据。

关键词： 黏聚裂纹     三点弯曲梁     混凝土     双K断裂参数     结构承载力    

HTML PDF 收藏

A new meshless approach for bending analysis of thin plates with arbitrary shapes and boundary conditions

《结构与土木工程前沿（英文）》 2022年 第16卷 第1期   页码 75-85 doi: 10.1007/s11709-021-0798-5

摘要： An efficient and meshfree approach is proposed for the bending analysis of thin plates. The approach is based on the choice of a set of interior points, for each of which a basis function can be defined. Plate deflection is then approximated as the linear combination of those basis functions. Unlike traditional meshless methods, present basis functions are defined in the whole domain and satisfy the governing differential equation for plate. Therefore, no domain integration is needed, while the unknown coefficients of deflection expression could be determined through boundary conditions by using a collocation point method. Both efficiency and accuracy of the approach are shown through numerical results of plates with arbitrary shapes and boundary conditions under various loads.

关键词： plate     bending     meshless method     collocation    

HTML PDF 收藏

Improved prediction of pile bending moment and deflection due to adjacent braced excavation

《结构与土木工程前沿（英文）》 doi: 10.1007/s11709-023-0961-2

摘要： Deep excavations in dense urban areas have caused damage to nearby existing structures in numerous past construction cases. Proper assessment is crucial in the initial design stages. This study develops equations to predict the existing pile bending moment and deflection produced by adjacent braced excavations. Influential parameters (i.e., the excavation geometry, diaphragm wall thickness, pile geometry, strength and small-strain stiffness of the soil, and soft clay thickness) were considered and employed in the developed equations. It is practically unfeasible to obtain measurement data; hence, artificial data for the bending moment and deflection of existing piles were produced from well-calibrated numerical analyses of hypothetical cases, using the three-dimensional finite element method. The developed equations were established through a multiple linear regression analysis of the artificial data, using the transformation technique. In addition, the three-dimensional nature of the excavation work was characterized by considering the excavation corner effect, using the plane strain ratio parameter. The estimation results of the developed equations can provide satisfactory pile bending moment and deflection data and are more accurate than those found in previous studies.

关键词： pile responses     excavation     prediction     deflection     bending moments    

HTML PDF 收藏

growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 905-913 doi: 10.1007/s11709-021-0683-2

摘要： In a nuclear powerplant, the rotary equipment, such as a pump directly fitted with hanger in the piping system, experiences torsional and bending loads. Higher crack growth rate occurs because of this torsional load in addition to the bending load. Hence, it is necessary to study the fatigue behavior of piping components under the influence of combined torsional and bending load. In this study, experimental fatigue life evaluation was conducted on a notched stainless steel SA312 Type 304LN straight pipe having an outer diameter of 170 mm. The experimental crack depth was measured using alternating current potential drop technique. The fatigue life of the stainless steel straight pipe was predicted using experiments, Delale and Erdogan method, and area-averaged root mean square–stress intensity factor approach at the deepest and surface points of the notch. Afterward, the fatigue crack growth and crack pattern were discussed. As a result, fatigue crack growth predicted using analytical methods are in good agreement with experimental results.

关键词： fatigue life     Delale and Erdogan method     RMS–SIF approach     stainless steel     torsion and bending load     fatigue crack growth    

HTML PDF 收藏

A novel structural modification to eliminate the early coupling between bending and torsional mode shapes

Nazim Abdul NARIMAN

《结构与土木工程前沿（英文）》 2017年 第11卷 第2期   页码 131-142 doi: 10.1007/s11709-016-0376-4

摘要： In this paper, a novel structural modification approach has been adopted to eliminate the early coupling between the bending and torsional mode shapes of vibrations for a cable stayed bridge model generated using ABAQUS software. Two lateral steel beams are added to the middle span of the structure. Frequency analysis is dedicated to obtain the natural frequencies of the first eight mode shapes of vibrations before and after the structural modification approach. Numerical simulations of wind excitations are conducted for the 3D model of the cable stayed bridge with duration of 30 s supporting on real data of a strong wind from the literature. Both vertical and torsional displacements are calculated at the mid span of the deck to analyze both the bending and the torsional stiffness of the system before and after the structural modification. The results of the frequency analysis after applying lateral steel beams declared a safer structure against vertical and torsional vibrations and rarely expected flutter wind speed. Furthermore, the coupling between the vertical and torsional mode shapes has been removed to larger natural frequencies magnitudes with a high factor of safety. The novel structural approach manifested great efficiency in increasing vertical and torsional stiffness of the structure.

关键词： aeroelastic instability     structural damping     flutter wind speed     bending stiffness     torsional stiffness    

HTML PDF 收藏

Scaling up of cluster beam deposition technology for catalysis application

《化学科学与工程前沿（英文）》 2021年 第15卷 第6期   页码 1360-1379 doi: 10.1007/s11705-021-2101-7

摘要： Many research works have demonstrated that the combination of atomically precise cluster deposition and theoretical calculations is able to address fundamental aspects of size-effects, cluster-support interactions, and reaction mechanisms of cluster materials. Although the wet chemistry method has been widely used to synthesize nanoparticles, the gas-phase synthesis and size-selected strategy was the only method to prepare supported metal clusters with precise numbers of atoms for a long time. However, the low throughput of the physical synthesis method has severely constrained its wider adoption for catalysis applications. In this review, we introduce the latest progress on three types of cluster source which have the most promising potential for scale-up, including sputtering gas aggregation source, pulsed microplasma cluster source, and matrix assembly cluster source. While the sputtering gas aggregation source is leading ahead with a production rate of ~20 mg·h–1, the pulsed microplasma source has the smallest physical dimensions which makes it possible to compact multiple such devices into a small volume for multiplied production rate. The matrix assembly source has the shortest development history, but already show an impressive deposition rate of ~10 mg·h–1. At the end of the review, the possible routes for further throughput scale-up are envisaged.

关键词： nanoparticle     cluster     cluster beam deposition     magnetron sputtering     heterogeneous catalysis    

HTML PDF 收藏

Analytical algorithms of compressive bending capacity of bolted circumferential joint in metro shield

《结构与土木工程前沿（英文）》   页码 901-914 doi: 10.1007/s11709-023-0915-8

摘要： The integrity and bearing capacity of segment joints in shield tunnels are associated closely with the mechanical properties of the joints. This study focuses on the mechanical characteristics and mechanism of a bolted circumferential joint during the entire bearing process. Simplified analytical algorithms for four stress stages are established to describe the bearing behaviors of the joint under a compressive bending load. A height adjustment coefficient, α, for the outer concrete compression zone is introduced into a simplified analytical model. Factors affecting α are determined, and the degree of influence of these factors is investigated via orthogonal numerical simulations. The numerical results show that α can be specified as approximately 0.2 for most metro shield tunnels in China. Subsequently, a case study is performed to verify the rationality of the simplified theoretical analysis for the segment joint via numerical simulations and experiments. Using the proposed simplified analytical algorithms, a parametric investigation is conducted to discuss the factors affecting the ultimate compressive bending capacity of the joint. The method for optimizing the joint flexural stiffness is clarified. The results of this study can provide a theoretical basis for optimizing the design and prediciting the damage of bolted segment joints in shield tunnels.

关键词： shield tunnel     segment joint     joint structural model     failure mechanism    

HTML PDF 收藏

A simplified method for investigating the bending behavior of piles supporting embankments on soft ground

《结构与土木工程前沿（英文）》   页码 1021-1032 doi: 10.1007/s11709-023-0952-3

摘要： In recent years, concrete and reinforced concrete piles have been widely used to stabilize soft ground under embankments. Previous research has shown that bending failure, particularly during rapid filling on soft ground, is the critical failure mode for pile-supported embankments. Here, we propose an efficient two-stage method that combines a test-verified soil deformation mechanism and Poulos’ solution for pile–soil interaction to investigate the bending behavior of piles supporting embankments on soft ground. The results reveal that there are three possible bending failure scenarios for such piles: at the interface between the soft and firm ground layers, at mid-depths of the fan zone, and at the boundary of the soil deformation mechanism. The location of the bending failure depends on the position and relative stiffness of the given pile. Furthermore, the effect of embedding a pile into a firm ground layer on the bending behavior was investigated. When the embedded length of a pile exceeded a critical value, the bending moment at the interface between the soft and firm ground layers reached a limiting value. In addition, floating piles that are not embedded exhibit an overturning pattern of movement in the soft ground layer, and a potential failure is located in the upper part of these piles.

关键词： bending behavior     pile     embankment     soil−structure interaction     failure mode    

HTML PDF 收藏

Parameter prediction in laser bending of aluminum alloy sheet

WANG Xuyue, XU Weixing, CHEN Hua, WANG Jinsong

《机械工程前沿（英文）》 2008年 第3卷 第3期   页码 293-298 doi: 10.1007/s11465-008-0046-x

摘要： Based on the basic platform of BP neural networks, a BP network model is established to predict the bending angle in the laser bending process of an aluminum alloy sheet (1–2 mm in thickness) and to optimize laser bending parameters for bending control. The sample experimental data is used to train the BP network. The nonlinear regularities of sample data are fitted through the trained BP network; the predicted results include laser bending angles and parameters. Experimental results indicate that the prediction allowance is controlled less than 5%–8% and can provide a theoretical and experimental basis for industry purpose.

关键词： control     industry purpose     nonlinear     network     aluminum    

HTML PDF 收藏

标题 作者 时间 类型 操作

Effect of asphalt thin beams mixed with three nominal maximum aggregate sizes in the bending beam rheometer

Chun-Hsing HO,María Francisca Martínez GONZÁLEZ,Cristina Pilar Martín LINARES

期刊论文

Erratum to: Bending and vibration of a discontinuous beam with a curvic coupling under different axial

期刊论文

软夹芯夹层梁最大弯曲正应力的计算

郝景新,刘文金,吴新凤

期刊论文

Bending and vibration of a discontinuous beam with a curvic coupling under different axial forces

Heng LIU, Jie HONG, Dayi ZHANG

期刊论文

砼非标准三点弯曲梁试件双K断裂参数

吴智敏,徐世烺,丁一宁,卢喜经,刘佳毅,丁生根

期刊论文

Performance of fixed beam without interacting bars

Aydin SHISHEGARAN, Behnam KARAMI, Timon RABCZUK, Arshia SHISHEGARAN, Mohammad Ali NAGHSH, Mohammreza MOHAMMAD KHANI

期刊论文

黏聚裂纹阻抗的弯曲梁承载力

王利民,徐世,任传波

期刊论文

A new meshless approach for bending analysis of thin plates with arbitrary shapes and boundary conditions

期刊论文

Improved prediction of pile bending moment and deflection due to adjacent braced excavation

期刊论文

growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending

期刊论文

A novel structural modification to eliminate the early coupling between bending and torsional mode shapes

Nazim Abdul NARIMAN

期刊论文

Scaling up of cluster beam deposition technology for catalysis application

期刊论文

Analytical algorithms of compressive bending capacity of bolted circumferential joint in metro shield

期刊论文

A simplified method for investigating the bending behavior of piles supporting embankments on soft ground

期刊论文

Parameter prediction in laser bending of aluminum alloy sheet

WANG Xuyue, XU Weixing, CHEN Hua, WANG Jinsong

期刊论文